Sinking or uneven pavers
We remove the affected pavers, excavate deeper, and rebuild the base with 6 inches of compacted gravel. Then we reset the pavers and re-sand the joints. Most repairs take 1 to 2 days and cost a fraction of a full rebuild.
Brick, stone, and paver patios that hold up to wet winters
Patio masonry contractor in Milwaukie built for Oregon weather
As a licensed patio masonry contractor in Milwaukie, we build brick, stone, and paver patios that stay level through Clackamas County's wet winters and dry summers. Whether you want a small backyard patio in Ardenwald or a full outdoor living space in Island Station, we handle the base prep, drainage, and finish work. Free estimates, honest pricing, and a 5-year workmanship warranty.
Fast online booking
Request service today
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now (855) 947-9500 → No spam. No obligation. Just practical help.
Careful work. Honest options.
About this service
What a patio masonry contractor in Milwaukie actually does
A patio masonry contractor in Milwaukie is a licensed tradesperson who designs, excavates, and builds outdoor patios using brick, stone, concrete block, or pavers set in mortar or sand. The work starts below grade with 4 to 6 inches of compacted gravel, a geotextile separator, and proper slope away from your foundation. We cut each unit with a wet saw, set it with a mason's level and mason's line, and finish joints with a jointing tool for a surface that drains and stays put. Most residential patios run 200 to 600 square feet and take 3 to 7 days from excavation to final cleanup.
Milwaukie sits in Clackamas County where the ground moves with the seasons and rain hangs around from October through May. That means a patio poured or laid without proper base prep will heave, settle, and crack within a few winters. We build for that reality: deeper base, better drainage, and materials rated for freeze-thaw cycles. If you have been searching for patio masonry near me Milwaukie and want a crew that understands local soil and weather, we are set up for exactly that kind of work.
- ✓ Built for freeze-thaw
- ✓ Drainage done right
- ✓ Materials that match your home
- ✓ 5-year workmanship warranty
What's included
What our patio masonry service includes
Every patio project is different, but most include the same core scope. Here is what we handle from start to finish, and what we can add on if you want it.
✓
Excavation and base prep
We excavate 8 to 10 inches, haul away spoils, and install 6 inches of compacted gravel plus a geotextile separator. This is the foundation of a patio that will not sink or heave.
✓
Material selection and delivery
We bring samples of brick, stone, and pavers from Belgard, Techo-Bloc, and Mutual Materials. You pick the material, we order it and coordinate delivery so it arrives when we are ready to lay.
✓
Setting and cutting
We set units with a mason's level and mason's line, cutting edges with a wet saw or angle grinder. For mortar-set patios we mix Sakrete or Quikrete to the correct ratio and lay a full mortar bed.
✓
Drainage and grading
We slope the patio at 1/8 inch per foot away from your house and add channel drains or French drains where needed. If your yard already has drainage issues, we address them before we lay the first paver.
✓
Jointing and finishing
We fill joints with polymeric sand or point mortar with a jointing tool. Then we clean the surface, haul away debris, and walk you through care instructions and your 5-year workmanship warranty.
How it works
Our patio masonry process, step by step
01
On-site estimate
We walk your yard, check slope and drainage, and talk through materials. You get a written estimate within 24 hours, usually the same day. No pressure, no vague ballpark numbers.
02
Layout and excavation
We mark the patio outline with stakes and mason's line, then excavate 8 to 10 inches deep. That depth gives us room for 6 inches of compacted gravel, a geotextile layer, and 1 inch of bedding sand or mortar. Most excavations take one day.
03
Base prep and compaction
We bring in crushed gravel, spread it in 2-inch lifts, and compact each lift with a plate compactor. This is the step most fly-by-night crews skip. It takes an extra half-day and it is the reason our patios do not sink.
04
Setting and cutting
We set brick, stone, or pavers with a mason's level and rubber mallet, cutting edges with a wet saw or angle grinder. For mortar-set patios we mix Sakrete or Quikrete to the right consistency and lay a full bed. This phase runs 2 to 4 days depending on square footage.
05
Jointing and cleanup
We fill joints with polymeric sand or point mortar with a jointing tool, then clean the surface and haul away debris. You get a walkthrough, care instructions, and your warranty paperwork before we leave.
Tools & methods
Tools and methods we use for patio masonry
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Mason's level and mason's line
Used to keep every course level and every edge straight. A patio that is out of level by 1/4 inch will pool water. We check level constantly during setting.
Wet saw and angle grinder
Wet saws cut brick, stone, and pavers cleanly with water to control dust. Angle grinders handle curved cuts and tight spots. Clean cuts make the finished patio look sharp.
Plate compactor
Compacts gravel base in 2-inch lifts. This is the single most important tool for a patio that will not settle. We run it over every lift before adding the next.
Jointing tool
Shapes and compacts mortar joints after pointing. A proper joint sheds water and looks uniform. We use jointer tools sized to match the joint width.
Mortar hoe and mixing tub
Mixes Sakrete, Quikrete, and lime mortar to the right consistency. We mix in small batches so mortar does not set up before we use it.
Brick tongs and brick hammer
Brick tongs let us carry multiple units safely. The brick hammer chips and shapes brick for tight fits. Both are standard on every masonry job.
Real results
Before and after.
Sinking brick patio rebuilt in Ardenwald
Before
A 300-square-foot brick patio installed 12 years ago had sunk 2 inches in the middle. Water pooled against the house after every rain, and several bricks were cracked from freeze-thaw.
After
We tore out the old patio, excavated to 10 inches, and rebuilt the base with 6 inches of compacted gravel. New brick was laid in herringbone with a channel drain at the low edge. The patio now slopes away from the house at 1/8 inch per foot.
New stone patio and fire pit in Island Station
Before
A homeowner had a bare dirt backyard that turned to mud every winter. They wanted a stone patio with a fire pit but were worried about drainage near the river.
After
We built a 400-square-foot flagstone patio on a 6-inch gravel base with a French drain along the low side. A 4-foot masonry fire pit with a firebrick liner anchors the space. The project took 8 working days.
Crumbling mortar joints restored in Hector Campbell
Before
A 1950s brick patio had mortar joints crumbling to the touch. Efflorescence covered the surface, and several bricks were spalling. The homeowner thought it needed a full rebuild.
After
We ground out the old mortar to 3/4 inch, repointed with lime mortar, and replaced 18 spalling bricks with matching units. The restoration took 2 days and cost 55 percent less than a rebuild. The patio is now solid and watertight.
Problems we solve
Patio problems we solve for Milwaukie homeowners
Milwaukie's wet winters and clay-heavy soil cause specific patio problems. Here are the ones we see most often and how we fix them.
Ask a pro →↗
Crumbling mortar joints
We grind out the old mortar to a depth of 3/4 inch and repoint with a lime-based mortar that matches the original. This restores the joint and keeps water out. We also check for efflorescence and water infiltration while we are in there.
Water pooling near the foundation
We regrade the patio to slope away from the house and install a channel drain or French drain at the low edge. If water is coming from downspouts, we extend them. This is a drainage fix, not a patio rebuild, and it usually takes 1 day.
Weeds growing between pavers
We pull weeds, clean out the joints, and refill with polymeric sand that hardens and blocks new growth. For severe cases we install a joint stabilizer. This is a maintenance item, not a rebuild, and it takes half a day.
Proof you can check
Licensed, insured, and warrantied
✓
Oregon CCB LicenseOregon Construction Contractors Board
✓
OSHA Safety CertificationOccupational Safety and Health Administration
✓
ASTM Masonry Standards complianceASTM International
✓
IBC complianceInternational Code Council
✓
Masonry Institute of America CertificationMasonry Institute of America
Most patio masonry projects in Milwaukie run $3,500 to $12,000 in 2026, depending on size, material, and site access. A simple 200-square-foot brick patio starts around $3,500, while a 500-square-foot stone patio with a fire pit can hit $12,000 or more. We give you a written estimate within 24 hours so you know the number before we start.
RenovoBase builds masonry patios throughout Milwaukie and Clackamas County. We are licensed, insured, and have been in business since 2021. Our crew handles brick, stone, paver, and concrete block patios, plus retaining walls and outdoor fireplaces. Call (855) 947-9500 to schedule a free on-site estimate.
Yes. We serve all Milwaukie neighborhoods including Downtown Milwaukie, Ardenwald, Hector Campbell, Island Station, Lake Road, Linwood, Concord, and Milwaukie Riverfront. If you are in ZIP codes 97222 or 97269, you are in our regular service area. We also work in nearby North Clackamas and parts of Clackamas County.
A typical 300-square-foot patio takes 4 to 6 working days from excavation to cleanup. Larger patios with retaining walls or fire features can take 2 to 3 weeks. Weather can add a day or two, especially in late fall or winter when rain slows excavation. We give you a realistic schedule up front and keep you posted daily.
More services
Related Services
brick masonry contractorBrick patios are our most requested patio style in Milwaukie. We match existing brick, cut units with a wet saw, and set them in mortar or sand. If your home is brick, a brick patio ties the whole yard together.Explore →
masonry contractors near meIf you need more than a patio, we handle masonry repairs, tuckpointing, and small structural work. One crew, one point of contact. That saves you from juggling three different contractors for a backyard project.Explore →
chimney masonry near meChimney leaks and spalling brick are common in older Milwaukie homes. We repair chimney masonry, rebuild crowns, and replace damaged brick. If your chimney sits near your patio, we can handle both in one visit.Explore →
masonry fireplace contractors near meAn outdoor masonry fireplace turns a patio into a year-round space. We build wood-burning and gas fireplaces with proper clearances and chimney height. Most builds add 5 to 10 days to a patio project.Explore →
masonry restorationOlder patios with crumbling mortar joints or settling pavers can often be restored instead of replaced. We repoint joints, reset sunken units, and match new material to old. Restoration typically costs 40 to 60 percent less than a full rebuild.Explore →stone masonry contractorNatural stone patios use bluestone, slate, or flagstone set in mortar or sand. Stone costs more than brick or pavers but lasts decades. We source from Pacific Northwest quarries and show you dry-laid samples before ordering.Explore →
emergency masonry repairIf a patio wall collapses or a retaining wall shifts after heavy rain, we respond fast. We secure the area, assess the damage, and give you a repair plan. Call (855) 947-9500 for emergency masonry repair in Milwaukie.Explore →
24/7 masonry contractorMasonry emergencies do not wait for business hours. We offer 24/7 phone support for urgent structural concerns like leaning walls or fallen brick. A real person answers, not a call center.Explore → Ready when you are
Get a free patio masonry contractor in Milwaukie estimate
Call (855) 947-9500 or fill out our form to schedule a free on-site estimate. We will walk your yard, talk through materials, and give you a written number within 24 hours. Licensed, insured, and warrantied.
Get Free Estimate (855) 947-9500 →
Request an appointment
Contact RenovoBase
Call (855) 947-9500 or email info@renovobase.com and we will get back to you within one business day. For emergencies, the 24/7 line is always open. We schedule estimates Monday through Friday and can usually be on site the same day you call.
Call anytime(855) 947-9500Email the officeinfo@renovobase.shop
Office hoursOpen 24 hours · 7 days a week