If your brickwork is spalling, your mortar joints are washing out, or your chimney has started to lean, you need historic masonry restoration Milwaukie OR homeowners and property managers call first. We work on pre-1950 brick, stone, and cast stone across Clackamas County, matching original mortar recipes and sourcing replacement brick that actually fits. One call gets you a same-week assessment and a straight answer on what the building needs.
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now (855) 947-9500 → No spam. No obligation. Just practical help.
Historic masonry restoration Milwaukie OR is the process of repairing and rebuilding aged brick, stone, and mortar assemblies so they keep doing their job for another 50 to 100 years. On a 1920s bungalow near the Milwaukie Riverfront, that usually means grinding out failed mortar to a depth of about 3/4 inch, repacking joints with a lime mortar that matches the original mix, and replacing any brick that has spalled past the point of saving. We use a trowel, jointing tool, and mason's line to keep courses true, and a brick hammer to sound-test each unit before we decide whether it stays or goes.
Most of the historic masonry repair Milwaukie property owners call us for starts with water. Milwaukie gets roughly 40 inches of rain a year, and that water finds every cracked joint, every failed flashing detail, and every bit of mortar joint deterioration on a 100-year-old chimney. Once it freezes, spalling brick starts popping off in sheets. If you have efflorescence blooming on the basement wall or a chimney that leaks into the attic, that is not cosmetic. We see it in Ardenwald, Hector Campbell, and the older blocks off Lake Road constantly, and it gets worse every wet season you wait.
Every historic masonry restoration project includes assessment, mortar matching, repointing, brick replacement, and a final walkthrough with photos. Waterproofing and chimney work are included when the scope calls for them. We spell out exactly what is covered in your written scope before we start, so there are no surprises.
We sound-test every wall, map failed joints and spalls, and give you a written scope with photos and a fixed price. This usually takes 60 to 90 minutes on a typical Milwaukie bungalow.
We pull a mortar sample and match the binder and aggregate. On pre-1930 brick that means lime mortar, not portland cement. This step is what makes the repair last instead of failing in five years.
Failed joints get ground out to about 3/4 inch, cleaned, and repacked with matched mortar. A two-person crew handles 80 to 120 square feet per day, so most homes take three to five days.
Spalled, cracked, or missing units are replaced with matched brick or cast stone. We source salvaged Milwaukie-area brick when we can, and cut new units on a wet saw for a tight fit.
We rebuild crowns, repoint stacks, and replace failed flashing. About 70 percent of the leaks we find in Milwaukie start at the chimney, so this is often the most important part of the job.
After the mortar cures, we apply a breathable masonry waterproofing that keeps rain out while letting the wall dry. We do not waterproof before repointing, because that traps moisture and causes more damage.
We walk the building, sound-test brick with a brick hammer, and map every failed joint, spall, and crack. You get photos, a written scope, and a fixed price, usually within 48 hours of the call. No charge for the assessment.
We pull a sample of the original mortar and match the aggregate and binder. On pre-1930 Milwaukie brick that almost always means a lime mortar, not portland cement. Getting this wrong is the number one reason historic repairs fail in five years, so we do not guess.
We grind out failed joints to about 3/4 inch with an angle grinder, blow the dust, and repack with a mortar hoe and jointing tool. A two-person crew handles 80 to 120 square feet of wall per day, so a typical bungalow takes three to five days.
Spalled or cracked units come out with a chisel and brick hammer and get replaced with matched brick or cast stone. We cut new units on a wet saw so the fit is tight, and we keep the mason's line strung so courses stay level across the repair.
Once the mortar cures, we apply a breathable masonry waterproofing, clean the wall, and walk the job with you. You get a photo record of everything we did and a 5-year workmanship warranty on the repointing.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Used to grind out failed mortar joints to the correct depth without damaging the surrounding brick. We run a vacuum attachment to control dust on occupied properties.
For sound-testing brick and removing spalled or cracked units by hand. Hand removal protects the surrounding masonry that stays in place.
For mixing and packing mortar into joints. The jointing tool shapes the joint profile to match the original wall, which matters on historic work.
To keep courses level and true across a repair. A wall that is out of level by a quarter inch over ten feet reads as a bad patch.
For cutting replacement brick and stone to exact size. A tight fit keeps water out of the joint and makes the repair last.
For carrying brick safely on scaffolding and roofs. A dropped brick on a steep roof is a hazard, and tongs eliminate that risk.
The chimney had mortar falling out of every joint, about 40 spalled brick, and a cracked crown that leaked into the attic. The owner had been patching it with caulk for two years.
We repointed the full stack, replaced 40 brick with matched salvaged units, rebuilt the crown, and installed new flashing. The job took four days and the chimney has not leaked since.
A 1940s commercial building had brick veneer detaching in one corner and efflorescence on the interior wall. The lender flagged it during a refinance.
We stabilized the veneer, replaced the failed ties, repointed 1,200 square feet of facade, and fixed the water infiltration. The job took three weeks and the lender signed off.
The homeowner had water in the basement after every heavy rain and cracked foundation masonry on the south wall. They had been quoted a full foundation rebuild.
We repointed the foundation, replaced 18 cracked brick, and improved the drainage. The job took six days and cost a fraction of the rebuild quote. The basement stayed dry through the next wet season.
Historic masonry fails in predictable ways. Here are the ones we see most often in Milwaukie, what happens if you ignore them, and how we fix them.
Ask a pro →We grind out the failed mortar, repack it with a matched lime mortar, and replace any brick that has spalled past saving. This restores the wall's ability to shed water and stops the freeze-thaw cycle.
We rebuild the crown, repoint the stack, replace spalled brick, and install new flashing. Most Milwaukie chimney jobs finish in two to four days and stop the leak at the source.
We repair and rebuild cracked foundation walls, address the water infiltration that caused the problem, and install proper drainage. We build to IBC and ASTM Masonry Standards so the repair holds.
We stabilize the veneer, replace failed ties, and reinstall it with proper flashing and weep details. This is an emergency call for us, and we can usually be on site within a few hours.
Most historic masonry restoration Milwaukie projects run $2,400 to $9,500 in 2026, depending on square footage and how much brick needs replacing. A single chimney repoint is usually $2,400 to $4,800. A full foundation repoint on a bungalow runs $5,000 to $9,500. We give you a fixed price after a free assessment, so you know the number before we start.
RenovoBase does. We are a Milwaukie-based masonry crew licensed through the Oregon CCB, and we have been restoring brick, stone, and chimneys across Clackamas County since 2021. We handle mortar matching, brick replacement, chimney rebuilds, and masonry waterproofing. Call (855) 947-9500 and we will schedule a free assessment, usually within 48 hours.
Yes. We restore historic brick homes, commercial buildings, and chimneys throughout Milwaukie, including Downtown, Ardenwald, and the Milwaukie Riverfront. We match original lime mortar, source salvaged brick, and build to IBC and ASTM Masonry Standards. If your building is pre-1950 and the mortar is soft or sandy, that is exactly the work we do.
A typical chimney repoint takes two to four days. A full foundation or wall repoint on a bungalow runs five to ten working days. Larger commercial projects can take three to six weeks. Weather matters in Milwaukie, so we schedule around the wet season and keep you updated daily on progress.
brick masonry contractorNew brick work and repairs that match the original wall. We handle brick replacement, tuckpointing, and full brick rebuilds on Milwaukie homes and commercial buildings, using salvaged and new brick sourced through Glen-Gery and Mutual Materials.Explore →
masonry contractors near meIf you are searching for masonry contractors near me in Milwaukie, we are local, licensed, and insured. We cover everything from repointing and chimney repair to foundation masonry and stone veneer, all within Clackamas County.Explore →
chimney masonry near meChimney leaks and spalling brick are the most common calls we get. We rebuild crowns, repoint stacks, replace spalled brick, and install new flashing. Most Milwaukie chimney jobs finish in two to four days.Explore →
masonry fireplace contractors near meWe rebuild and restore masonry fireplaces, including fireboxes, hearths, and surrounds. If your fireplace has cracked brick or failing mortar, we can restore it to safe, working condition without tearing out the original stone.Explore →
masonry restorationFull-scope restoration for brick, stone, and block walls. We assess, repoint, replace failed units, and waterproof. This is the core of what we do on Milwaukie's older building stock.Explore →
stone masonry contractorStone walls, foundations, and veneers get the same care as brick. We repoint stone with matched mortar, reset settled units, and rebuild failing sections using natural stone and cast stone.Explore →
emergency masonry repairWhen a chimney leans, a wall bulges, or brick veneer detaches, we respond fast. We stabilize the structure first, then schedule the permanent repair. Available across Milwaukie and Clackamas County.Explore →
24/7 masonry contractorMasonry failures do not wait for business hours. Our 24/7 line covers emergency calls for chimney leaks, cracked foundations, and falling brick. We can usually have someone on site within a few hours.Explore →Free assessment, fixed price, 5-year workmanship warranty on repointing. We are licensed through the Oregon CCB and insured, and we have been restoring Milwaukie masonry since 2021. Call today and we will get eyes on your building this week.
Get Free Assessment (855) 947-9500 →Call (855) 947-9500 or email info@renovobase.com and we will get back to you within one business day. For emergencies, the 24/7 line is always open. We schedule estimates Monday through Friday and can usually be on site the same day you call.