Cracked foundation and settling block walls
We excavate the wall, repair or rebuild the block, add reinforcing steel and grout, and waterproof the exterior before backfill. Most foundation repairs finish in two to four days.
Licensed masonry crews serving Clackamas County since 2021
Concrete masonry contractor in Milwaukie for block, brick and stone
As a concrete masonry contractor in Milwaukie, we build and repair block walls, foundations, veneers and patios that stand up to Oregon rain. Our concrete masonry services Milwaukie homeowners and commercial property managers rely on cover everything from cracked foundation repair to full block wall replacement. We show up when we say we will, price the job upfront, and leave a clean site.
Fast online booking
Request service today
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now (855) 947-9500 → No spam. No obligation. Just practical help.
Careful work. Honest options.
About this service
What a concrete masonry contractor in Milwaukie actually does
A concrete masonry contractor in Milwaukie is a licensed tradesperson who lays concrete block, brick, stone and cast stone into structural and decorative assemblies. That covers foundation walls, retaining walls, chimney stacks, veneers, patios and fire pits. We mix mortar to the right ratio, set reinforcing steel on a mason's line, and tool every joint so water sheds instead of soaking in. Concrete block masonry Milwaukie OR homes need is not just stacking units; it is drainage, flashing and footing work that keeps the wall straight for decades.
Milwaukie sits in a wet pocket of Clackamas County where freeze-thaw cycles crack mortar and water finds every bad joint. If you have spalling brick, efflorescence on a block wall, or a chimney that leaks into the attic, the damage gets worse each season. We handle concrete masonry services Milwaukie Oregon properties need, from a single tuckpoint repair to a full veneer rebuild. Call (855) 947-9500 and we will tell you what the wall needs.
- ✓ Walls that stay straight
- ✓ Water kept outside
- ✓ Licensed and code-correct
- ✓ Affordable concrete masonry Milwaukie
What's included
What our concrete masonry service includes
Every concrete masonry job we quote in Milwaukie includes the structural work, the materials and the cleanup. Add-ons like decorative caps or sealing are priced separately so you only pay for what you want.
✓
Site inspection and written scope
We probe mortar joints, check for spalling brick and water infiltration, and look at the footing. You get a written scope with materials, timeline and a fixed price before any work starts.
✓
Tear-out and disposal
Failed block, brick or veneer comes out, and we haul every pallet and scrap away. Tear-out is included in the quoted price, not billed as a surprise extra.
✓
Footing and base prep
Walls need a footing below the frost line and patios need a compacted base. We dig, pour or compact, and set the first course on a mason's line so the wall starts dead level.
✓
Block, brick or stone installation
We set units on mortar, cut with a wet saw and angle grinder, and grout reinforcing steel where the wall carries load. Materials come from Mutual Materials, Oldcastle, Belgard or Techo-Bloc.
✓
Flashing, weep holes and sealing
Water control is built in: flashing at the base, weep holes in the veneer, and a breathable sealer after cure. This is what stops efflorescence and spalling brick down the road.
✓
Cleanup and one-year warranty
We tool joints, brush the wall, and walk the job with you. Workmanship is warrantied for one year, and we leave a written care sheet for the mortar and sealer.
How it works
How our concrete masonry process works
01
Call and scope
You call (855) 947-9500 or send photos. We ask about the wall, the age of the house and what you are seeing, then book a site visit. Most Milwaukie estimates happen within 48 hours, and the visit takes 30 to 45 minutes.
02
On-site inspection
We probe mortar joints with a chisel, check for spalling brick and water infiltration, and look at the footing. You get a written scope with materials, timeline and price. No pressure, no same-day signing.
03
Materials and layout
We order block, brick or natural stone veneer from Mutual Materials or a Belgard and Techo-Bloc dealer, plus Sakrete or Quikrete mortar mix. Layout lines go up with a mason's line so the first course is dead level.
04
Build and repair
Crews cut with a wet saw and angle grinder, set units on mortar, and grout reinforcing steel where the wall needs it. A typical chimney rebuild takes two to three days; a patio or retaining wall runs three to seven.
05
Cleanup and walkthrough
We tool the joints, brush the wall, and haul away every pallet and scrap. You walk the job with the lead mason, and we leave a written care sheet. Workmanship is warrantied for one year.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Mason's level and mason's line
Used on every course to keep walls plumb, level and straight. A wall set without a line wanders, and wandering walls crack at the joints.
Wet saw and angle grinder
Cuts block, brick and stone to size with clean edges. We use them for arches, caps, and fitting units around windows and doors.
Trowel, jointer and mortar hoe
The trowel spreads mortar, the jointer shapes joints so water sheds, and the mortar hoe mixes to the right ratio in the tub.
Brick hammer and chisel
Used to cut out spalled brick and probe mortar joints during inspection. A chisel tells us in seconds whether a joint is sound or crumbling.
Sakrete and Quikrete mortar mix
Pre-blended mortar for consistent color and strength. We match the mix to the wall, using lime mortar on historic brick and portland cement on new block.
Mutual Materials and Oldcastle block
Local block and brick supply for Milwaukie jobs. Short supply lines mean fewer delays when a wall needs to close before rain.
Belgard and Techo-Bloc pavers
Used for patios, driveways and caps where a manufactured stone look is wanted. We set them on a compacted base with edge restraint.
Real results
Before and after.
Cracked block foundation in Ardenwald
Before
A 1940s home had a full-height crack in the block foundation and water entering the basement every winter. The footing had moved, and mortar joints were crumbling along the crack line.
After
We excavated the wall, rebuilt the cracked section with new block and reinforcing steel, grouted the cores, and waterproofed the exterior. The basement has stayed dry through two rainy seasons.
Spalling chimney brick near Milwaukie Riverfront
Before
A 1920s chimney had spalling brick, a cracked crown and water staining on the ceiling below. The original lime mortar was failing and had been patched with portland cement in spots.
After
We cut out the spalled units, matched the original brick color, repointed with lime mortar, and rebuilt the crown and flashing. The leak stopped and the repair blends into the house.
Block retaining wall on a Linwood slope
Before
A slope above a driveway kept washing out, and the old timber wall was rotting and bulging. Water ran straight into the driveway after every storm.
After
We poured a footing below the frost line, set block on a mason's line, added drainage gravel and weep holes, and capped the wall with cast stone. The slope holds and water drains to the yard.
Problems we solve
Masonry problems we fix in Milwaukie
Most masonry calls in Milwaukie come down to water and movement. Here are the four we see most, what happens if you leave them, and how we fix them.
Ask a pro →↗
Spalling brick and mortar joint deterioration
We cut out failed units, match brick color, and repoint joints with the right mortar mix. Tuckpointing a chimney or wall typically takes one to two days and stops the cycle.
Chimney leaks and water infiltration
We rebuild the crown, replace flashing, repoint the stack and seal the brick. A typical chimney repair runs $2,500 to $8,000 depending on height and access.
Efflorescence and brick veneer detachment
We find the water source, fix flashing and weep holes, and re-anchor or rebuild the veneer. Sealing after cure keeps the wall shedding water instead of soaking it.
Proof you can check
Licensed, insured and reviewed
✓
Oregon CCB LicenseOregon Construction Contractors Board
✓
OSHA Safety CertificationOccupational Safety and Health Administration
✓
IBC and ASTM Masonry StandardsInternational Code Council and ASTM International
✓
LEED AccreditationU.S. Green Building Council
✓
Masonry Institute of America CertificationMasonry Institute of America
Typical 2026 pricing runs $350 to $900 for small repairs like tuckpointing or a cracked foundation patch, and $4,000 to $12,000 for a full block wall or veneer replacement. Chimney rebuilds land between $2,500 and $8,000. Access, wall height and whether we need a wet saw on site all move the number.
RenovoBase does. We are an Oregon CCB licensed masonry contractor based in Milwaukie, serving Clackamas County ZIP codes 97222 and 97269 since 2021. We handle concrete block, brick, stone veneer, foundations and chimneys. Call (855) 947-9500 and we will schedule a site visit within 48 hours.
Yes. We cover every Milwaukie neighborhood, including Downtown Milwaukie, Ardenwald, Hector Campbell, Island Station and Milwaukie Heights. If you are searching for a concrete masonry contractor near me Milwaukie OR, we are usually on site the same week. Emergency wall or chimney calls get a two-hour response window.
Most repairs finish in one to three days. Tuckpointing a chimney takes a day, a foundation patch runs two days, and a full block wall replacement takes three to seven days depending on length and weather. We do not start a wall we cannot finish before a rain front moves in.
More services
Related Services
brick masonry contractorBrick and concrete block share mortar, flashing and footing work, so most Milwaukie brick jobs start with the same inspection we do for block. We match historic brick color and rebuild spalled courses.Explore →
masonry contractors near meIf you searched masonry contractors near me, you want someone local who can be back for a callback. We are based in Milwaukie and cover Clackamas County, so we are on your street, not across the river.Explore →
chimney masonry near meChimney leaks and crumbling brickwork are our most common winter call. We rebuild stacks, replace crowns, and repoint mortar joints so water stops running into the flue and attic.Explore →
masonry fireplace contractors near meAn outdoor or indoor fireplace is a concrete masonry build with a firebox, hearth and chimney. We set cast stone surrounds, fire brick and dampers to code so the fireplace draws and stays sealed.Explore →
masonry restorationHistoric Milwaukie homes need lime mortar, not modern portland cement, or the brick spalls. We match original mortar, rebuild veneer, and stabilize settling walls without changing the look of the house.Explore →
stone masonry contractorNatural stone veneer and full stone walls use the same footing and drainage details as concrete block. We set Glen-Gery and Boral stone on a mason's line for straight, water-shedding walls.Explore →
emergency masonry repairA wall moving after heavy rain or a chimney leaning off the roof is a structural emergency. We shore, brace and rebuild, with 24/7 availability for Milwaukie and North Clackamas properties.Explore →
24/7 masonry contractorWe answer the phone at 2 a.m. when a block wall fails or a chimney drops brick onto a roof. Emergency calls get a two-hour response window and a same-night temporary fix.Explore → Ready when you are
Get your concrete masonry contractor in Milwaukie on the phone
We are Oregon CCB licensed, insured and warrantied for one year on workmanship. Call (855) 947-9500 and we will book a site visit within 48 hours, or sooner for emergency wall and chimney calls.
Get Free Estimate (855) 947-9500 →
Request an appointment
Contact RenovoBase
Call (855) 947-9500 or email info@renovobase.com and we will get back to you within one business day. For emergencies, the 24/7 line is always open. We schedule estimates Monday through Friday and can usually be on site the same day you call.
Call anytime(855) 947-9500Email the officeinfo@renovobase.shop
Office hoursOpen 24 hours · 7 days a week